VORTEX RAD / RAV "RS-Racing"
Piston "RS-Racing Version".
Piston is out of a Al-Sil alloy-composition with a separate special insert in the piston head for controlled termal conditions in the burning chamber, see also informations under "home".
The kit consists of
1 piston
1 piston-ring 1.7 mm
1 piston-pin diameter 15 mm
2 clips
Piston is out of a Al-Sil alloy-composition with a separate special insert in the piston head for controlled termal conditions in the burning chamber, see also informations under "home".
The kit consists of
1 piston
1 piston-ring 1.7 mm
1 piston-pin diameter 15 mm
2 clips
The Titan-Piston Maiolo has a special geometry, which was adapted and optimized for:
- a better compression
- reduced friction
- easier running in the cylinder
- reduced abrasion
By that, no modifications of the mounting clearance have to be made (please use the mounting clearance provided by the engine-manufacturer, We recommend an additional mounting clearance (freeplay between piston & cylinder) of 0,01-0,02 mm to the provided informations of the engine manufacturer.
Attention: Before starting the assembly of the piston, always do the measuring of the joint / gap of the piston-ring. The dimension must be 0,30 mm. We recommend a dimension in the range of 0,30-0,35 mm.
Attention: The Titan-Piston needs more benzine / gasoline, please make corresponding settings on the Carburetor.
|
|
The piston has following dimensions: C+l = 28.3 S = 31 A = 62 D = Ø15 See picture.
|
.jpg) |